Mô tả:

Any studio can proudly offer the CK-7 as a vocal mic or utility condenser due to its versatility...It exudes class visually as well as sonically.
The Avantone Cabernet (C-series) mics from Avant Electronics are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics.
The Avantone CK-7 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to some of the very finest FET mics...but at a fraction of their cost!

Tính năng:
- The rugged CK-7 microphone body and capsule assembly are precision machined of BRASS.
- Aesthetically, it features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and grill.
- The transformer coupled Discreet Class A FET circuitry will yield pleasing professional results comparable to much more expensive designs.
- The CK-7 in its normal stock version uses high grade Polystyrene and Metalized Polypropylene capacitors in the audio path. This represents Avantone's commitment to quality as these normally are the type of components that are implemented by microphone modder/hot-rodders !
- Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability.
- The versatile CK-7 mic is able to produce professional results with a warm, pleasing sonic character.
- The included Custom Retro Shock Mount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.
- 3-Pattern CLASS A FET Microphone with dual 35mm gold sputtered thin Mylar capsules
- -10 dB pad & 80 Hz LF roll off switches
- Each CK7 Mic & wooden mic box has a serial number

Thông số kỹ thuật:

Type: True Condenser
Polar Pattern/s: Cardioid , Omni , Figure 8
Frequency Response: 20-20,000 Hz +/- 3dB
Output Impedance: <=250 Ohms
Maximum SPL: 139dB (0.5% THD @1000Hz)
Sensitivity: -38 dB (0 dB=1V/Pa)
Equivalent noise level: (A-Weighted per IEC 286-4) <16 dB
Output Connector: Male XLR 3 pin
High-Pass Switch: 80 Hz 6dB/octave
Attenuation Switch: -10 dB
Power Requirement: Standard 48 Volt Phantom / 5mA
Included Accessories: Wooden Box & Shock Mount, Metal case
Finish: Polished Nickel trim, Metallic wine red body
Weight: .65 kgs / 1.4 pounds
Dimensions: 187 x 51mm / 7.5 x 2 inches